Fabrication and Characterization of HA/SiO₂ Coatings by Gas Tunnel Plasma Spraying

Morks, Magdi F.; Kobayashi, Akira

doi:https://doi.org/10.18910/12303

このアイテムのアクセス数:87件（2023-06-01 06:49 集計）

このアイテムへのリンクには次のURLをご利用ください: https://doi.org/10.18910/12303

このアイテムへのリンクには次のURLをご利用ください: https://hdl.handle.net/11094/12303

閲覧可能ファイル

ファイル	フォーマット	利用条件	サイズ	閲覧回数	利用開始日	説明
jwri35_02_11	pdf	なし	338 KB	176	2012.09.22

論文情報

ファイル出力

タイトル	Fabrication and Characterization of HA/SiO₂ Coatings by Gas Tunnel Plasma Spraying
著者	著者名 Morks, Magdi F.
著者	NRID 1000070110773 1000070110773 著者名 Kobayashi, Akira
キーワード等	Hydroxyapatite/SiO₂
	Plasma Spraying
	Microstructure
	Hardness
	Abrasive Wear
抄録	Fused silica powder has been mixed with hydroxyapatite (HA) powder and plasma sprayed by using a gas tunnel-type plasma jet. The influence of silica content (10 Wt. % and 20 Wt. %) on the microstructure and mechanical properties of HA-silica coatings was investigated. The spraying was carried out on a SUS 304 substrate in an atmospheric chamber. Scanning electron microscope micrographs of cross-sectioned HA/SiO2 coatings showed that the sprayed samples of 10 and 20 wt.% silica have dense structure with low porosity as well as higher abrasive wear resistance compared to pure HA coatings. As the amount of silica was increased, the coatings become denser, harder and exhibited higher abrasive wear resistance compared to the pure HA coatings.
出版者	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
収録物名	Transactions of JWRI
巻(号)	35(2)
ページ	11-16
刊行年月	2006-12
言語	英語
ハンドルURL	https://hdl.handle.net/11094/12303
DOI	https://doi.org/10.18910/12303
PISSN	03874508
NCID	AA00867058
アクセス権	open access
出版タイプ	Version of Record
カテゴリ	紀要論文 Departmental Bulletin Paper
カテゴリ	Transactions of JWRI / Vol.35 No.2 (2006-12)

資源タイプ	紀要論文
ローカル資源タイプ	紀要論文
DCMI資源タイプ	text
DCTERMS.bibliographicCitation	Transactions of JWRI.35(2) p.11-p.16
DC.title	Fabrication and Characterization of HA/SiO₂ Coatings by Gas Tunnel Plasma Spraying
DC.creator	Morks, Magdi F.
DC.creator	Kobayashi, Akira
DC.publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
DC.language' scheme='DCTERMS.RFC1766	英語
DC.type' scheme='DCTERMS.DCMIType	text
DCTERMS.issued' scheme='DCTERMS.W3CDTF	2006-12
DC.subject	Hydroxyapatite/SiO₂
	Plasma Spraying
	Microstructure
	Hardness
	Abrasive Wear
DCTERMS.abstract	Fused silica powder has been mixed with hydroxyapatite (HA) powder and plasma sprayed by using a gas tunnel-type plasma jet. The influence of silica content (10 Wt. % and 20 Wt. %) on the microstructure and mechanical properties of HA-silica coatings was investigated. The spraying was carried out on a SUS 304 substrate in an atmospheric chamber. Scanning electron microscope micrographs of cross-sectioned HA/SiO2 coatings showed that the sprayed samples of 10 and 20 wt.% silica have dense structure with low porosity as well as higher abrasive wear resistance compared to pure HA coatings. As the amount of silica was increased, the coatings become denser, harder and exhibited higher abrasive wear resistance compared to the pure HA coatings.
DC.identifier	10.18910/12303
DC.format	application/pdf
citation_doi	https://doi.org/10.18910/12303
citation_title	Fabrication and Characterization of HA/SiO₂ Coatings by Gas Tunnel Plasma Spraying
citation_author	Morks, Magdi F.
citation_author	Kobayashi, Akira
citation_publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
citation_language	英語
citation_date	2006-12
citation_journal_title	Transactions of JWRI
citation_volume	35
citation_issue	2
citation_firstpage	11
citation_lastpage	16
citation_public_url	https://hdl.handle.net/11094/12303
citation_doi_detail	10.18910/12303

閲覧可能ファイル

論文情報

論文詳細を表示