Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining

Nagatsuka, Kimiaki; Bolyu, Xiao; Tsuchiya, Atsuki et al.

Transactions of JWRI, 2015, 44(1), 9-14

アクセス数:583件（2025-07-03 20:57 集計）

固定URL: https://doi.org/10.18910/57264

閲覧可能ファイル 

ファイル フォーマット 利用条件 サイズ 閲覧回数 利用開始日 説明 information
jwri44_1-009 pdf なし 1.89 MB 289 2016.07.25  

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

タイトル
Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining
著者
著者名
Nagatsuka, Kimiaki
著者名
Bolyu, Xiao
著者名
Tsuchiya, Atsuki
NRID
1000090273713 1000090273713
researchmap permalink
mtsukamoto mtsukamoto
Scopus Author ID
35370999700 35370999700
著者名
Tsukamoto, Masahiro
NRID
1000080112069 1000080112069
著者名
Nakata, Kazuhiro
キーワード等
Friction lap joining
CFRTP
AL alloy
Dissimilar materials joining
抄録
Carbon fiber reinforced thermoplastics,which consisted of the polyamide 6 as the matrix and 20wt%carbon fiber,and A5052 plates were directly joined by the friction lap joining method.A continuous joined interface of A5052/CFRTP joint was obtained at various tool rotation speeds ranging from 1000 to 2500rmp.These materials were joined by bonding of MgO oxide layer of A5052 and PA6 as the matrix of the CFRTP.Voids were observed in the CFRTP at the interface of the joint,and its quantity increased with increasing tool rotation speed.The tensile shear fracture load of the FLJ joint increased with increasing the tool rotation speed from 1000 to 2000 rpm,and then it decreased.The fracture mainly occurred at the joint interface,however,some joints joined at the tool rotation speed of 2000 and 2500 rpm showed the CFRTP base plate fracture.
出版者
大阪大学接合科学研究所
オオサカ ダイガク セツゴウ カガク ケンキュウジョ
Joining and Welding Research Institute, Osaka University
収録物名
Transactions of JWRI
巻(号)
44(1)
ページ
9-14
刊行年月
2015-06
言語
英語
ハンドルURL
https://hdl.handle.net/11094/57264
DOI
https://doi.org/10.18910/57264
PISSN
03874508
NCID
AA00867058
アクセス権
open access
出版タイプ
Version of Record
カテゴリ
紀要論文 Departmental Bulletin Paper
Transactions of JWRI / Vol.44 No.1 (2015-06)