Diffusion Bonding of Titanium Aluminide and Low-Carbon Steel Using a Spark Plasma Sintering System

Kohama, Kazuyuki; Ito, Kazuhiro

Transactions of JWRI, 2015, 44(2), 23-26

アクセス数:243件（2025-07-02 20:23 集計）

固定URL: https://doi.org/10.18910/57273

閲覧可能ファイル 

ファイル フォーマット 利用条件 サイズ 閲覧回数 利用開始日 説明 information
jwri44_2-023 pdf なし 669 KB 140 2016.07.25  

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

タイトル
Diffusion Bonding of Titanium Aluminide and Low-Carbon Steel Using a Spark Plasma Sintering System
著者
著者名
Kohama, Kazuyuki
著者名
Ito, Kazuhiro
抄録
Diffusion bonding of titanium-aluminide based alloys(TiAl)and SS400 low-carbon steels was conducted at 600-800℃for 0-60 min using a spark plasma sintering(SPS)system,then bonding strength of the TiAl/SS400 joints were evaluated by shear tests. Compared to previous studies regarding diffusion bonding of TiAl and high-carbon steels,the TiAl/SS400 joints exhibited considerably higher bonding strength. The reason for this is presumably based on increase in bonding area and formation of thinner TiC-based layers at the bonding interface derived from the higher deformability and lower carbon content in SS400. In addition, Vickers hardness measured on the surface of the TiAl and SS400 samples significantly increased after bonding regardless of the bonding temperature, showing that TiAl/SS400 joints with high surface hardness can be fabricated using the SPS system.
出版者
大阪大学接合科学研究所
オオサカ ダイガク セツゴウ カガク ケンキュウジョ
Joining and Welding Research Institute, Osaka University
収録物名
Transactions of JWRI
巻(号)
44(2)
ページ
23-26
刊行年月
2015-12
言語
英語
ハンドルURL
https://hdl.handle.net/11094/57273
DOI
https://doi.org/10.18910/57273
PISSN
03874508
NCID
AA00867058
アクセス権
open access
出版タイプ
Version of Record
カテゴリ
紀要論文 Departmental Bulletin Paper
Transactions of JWRI / Vol.44 No.2 (2015-12)