Dissimilar Lap Welding of Ni-based Metallic Glass and Stainless Steel Foil by Fiber Laser Beam

Tsumura, Takuya; Hamada, Shinsuke; Kimura, Hisamichi; Inoue, Akihisa; Nakata, Kazuhiro

doi:https://doi.org/10.18910/5912

Dissimilar Lap Welding of Ni-based Metallic Glass and Stainless Steel Foil by Fiber Laser Beam

Tsumura, Takuya; Hamada, Shinsuke; Kimura, Hisamichi et al.

Transactions of JWRI, 2011, 40(2), 45-48

アクセス数:198件（2025-04-27 05:38 集計）

固定URL: https://doi.org/10.18910/5912

閲覧可能ファイル

ファイル	フォーマット	利用条件	サイズ	閲覧回数	利用開始日	説明	information
jwri40_02_045	pdf	なし	336 KB	126	2012.09.22

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

タイトル	Dissimilar Lap Welding of Ni-based Metallic Glass and Stainless Steel Foil by Fiber Laser Beam
著者	NRID 1000000283812 1000000283812 著者名 Tsumura, Takuya
	著者名 Hamada, Shinsuke
	NRID 1000000161571 1000000161571 著者名 Kimura, Hisamichi
	NRID 1000010108566 1000010108566 著者名 Inoue, Akihisa
	NRID 1000080112069 1000080112069 著者名 Nakata, Kazuhiro
キーワード等	Ni-based metallic glass foil
	Stainless steel foil
	Laser welding
	Fiber laser
	Tensile shear test
抄録	Dissimilar joining of Ni₆₀Nb₁₅Ti₄₅Zr₁₀ metallic glass foils to type316L stainless steel foils has been investigated using a fiber laser welding method. Dissimilar joints without cracking were obtained at the condition of laser power from 20 W to 35 W with constant welding speeds of 100 mm/s and argon gas shielding. Partial crystallization of metallic glass weld was detected by XRD over 30 W of laser power. Fracture loads of dissimilar joints increased with increasing laser power, but excess laser power at 35 W reduced the joint strength due to crystallization of the welds.
出版者	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
収録物名	Transactions of JWRI
巻(号)	40(2)
ページ	45-48
刊行年月	2011-12
言語	英語
ハンドルURL	https://hdl.handle.net/11094/5912
DOI	https://doi.org/10.18910/5912
PISSN	03874508
NCID	AA00867058
アクセス権	open access
出版タイプ	Version of Record
カテゴリ	紀要論文 Departmental Bulletin Paper
カテゴリ	Transactions of JWRI / Vol.40 No.2 (2011-12)

資源タイプ	紀要論文
ローカル資源タイプ	紀要論文
DCMI資源タイプ	text
DCTERMS.bibliographicCitation	Transactions of JWRI. 2011, 40(2), p. 45-48
DC.title	Dissimilar Lap Welding of Ni-based Metallic Glass and Stainless Steel Foil by Fiber Laser Beam
DC.creator	Tsumura, Takuya
	Hamada, Shinsuke
	Kimura, Hisamichi
	Inoue, Akihisa
	Nakata, Kazuhiro
DC.publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
DC.language' scheme='DCTERMS.RFC1766	英語
DC.type' scheme='DCTERMS.DCMIType	text
DCTERMS.issued' scheme='DCTERMS.W3CDTF	2011-12
DC.subject	Ni-based metallic glass foil
	Stainless steel foil
	Laser welding
	Fiber laser
	Tensile shear test
DCTERMS.abstract	Dissimilar joining of Ni₆₀Nb₁₅Ti₄₅Zr₁₀ metallic glass foils to type316L stainless steel foils has been investigated using a fiber laser welding method. Dissimilar joints without cracking were obtained at the condition of laser power from 20 W to 35 W with constant welding speeds of 100 mm/s and argon gas shielding. Partial crystallization of metallic glass weld was detected by XRD over 30 W of laser power. Fracture loads of dissimilar joints increased with increasing laser power, but excess laser power at 35 W reduced the joint strength due to crystallization of the welds.
DC.identifier	10.18910/5912
DC.format	5912
citation_title	Dissimilar Lap Welding of Ni-based Metallic Glass and Stainless Steel Foil by Fiber Laser Beam
citation_author	Tsumura, Takuya
	Hamada, Shinsuke
	Kimura, Hisamichi
	Inoue, Akihisa
	Nakata, Kazuhiro
citation_publisher	大阪大学接合科学研究所
citation_language	英語
citation_date	2011-12
citation_journal_title	Transactions of JWRI
citation_volume	40
citation_issue	2
citation_firstpage	45
citation_lastpage	48
citation_public_url	https://hdl.handle.net/11094/5912
citation_doi_detail	10.18910/5912
citation_doi	https://doi.org/10.18910/5912

Dissimilar Lap Welding of Ni-based Metallic Glass and Stainless Steel Foil by Fiber Laser Beam

閲覧可能ファイル

論文情報

論文詳細を表示