Strength of High Manganese Non-magnetic Steel/Carbon Steel Hybrid Girder : Investigation for Applying Dissimilar Materials to Steel Structures (Report IV)

Hirohata, Mikihito; Kim, You-Chul

doi:https://doi.org/10.18910/7881

Strength of High Manganese Non-magnetic Steel/Carbon Steel Hybrid Girder : Investigation for Applying Dissimilar Materials to Steel Structures (Report IV)

Hirohata, Mikihito; Kim, You-Chul

Transactions of JWRI, 2009, 38(1), 69-74

アクセス数:168件（2025-05-09 18:02 集計）

固定URL: https://doi.org/10.18910/7881

閲覧可能ファイル

ファイル	フォーマット	利用条件	サイズ	閲覧回数	利用開始日	説明	information
jwri38_01_069	pdf	なし	276 KB	542	2012.09.22

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

タイトル	Strength of High Manganese Non-magnetic Steel/Carbon Steel Hybrid Girder : Investigation for Applying Dissimilar Materials to Steel Structures (Report IV)
著者	NRID 1000050565140 1000050565140 ORCID 0000-0003-4013-7960 0000-0003-4013-7960 researchmap permalink m_hirohata m_hirohata Scopus Author ID 7006219862 7006219862 著者名 Hirohata, Mikihito
著者	NRID 1000020144529 1000020144529 著者名 Kim, You-Chul
キーワード等	Hybrid Structure
	Magnetically Levitated Vehicle
	Non-magnetic Steel
	Dissimilar Steel
	Young’s modulus
抄録	The strength of a hybrid girder with a high manganese non-magnetic (Hi-Mn) steel / carbon (SM490; SM) steel (Hybrid girder) was investigated based on the results of the elastic-plastic large deformation analysis. The yield stress and Young’s modulus of Hi-Mn steel were 16% larger and 20% smaller compared with those of SM steel. When the upper half was assembled with Hi-Mn steel and the lower half of the cross section of the Hybrid girder was assembled with SM steel, the yielding moment was 2% and 18% larger than those of the girder with only Hi-Mn steel and the girder with only SM steel. The bending stiffness was 8% larger and 11% smaller than those of Hi-Mn and SM girders. The out-of-plane deformation of the web was larger than those of Hi-Mn and SM girders. By moving the position of the horizontal stiffener of the Hybrid girder 10% lower, the out-of-plane deformation of the web was controlled to smaller than those of Hi-Mn and SM girders.
出版者	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
収録物名	Transactions of JWRI
巻(号)	38(1)
ページ	69-74
刊行年月	2009-09
言語	英語
ハンドルURL	https://hdl.handle.net/11094/7881
DOI	https://doi.org/10.18910/7881
PISSN	03874508
NCID	AA00867058
アクセス権	open access
出版タイプ	Version of Record
カテゴリ	紀要論文 Departmental Bulletin Paper
カテゴリ	Transactions of JWRI / Vol.38 No.1 (2009-09)

資源タイプ	紀要論文
ローカル資源タイプ	紀要論文
DCMI資源タイプ	text
DCTERMS.bibliographicCitation	Transactions of JWRI. 2009, 38(1), p. 69-74
DC.title	Strength of High Manganese Non-magnetic Steel/Carbon Steel Hybrid Girder : Investigation for Applying Dissimilar Materials to Steel Structures (Report IV)
DC.creator	Hirohata, Mikihito
DC.creator	Kim, You-Chul
DC.publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
DC.language' scheme='DCTERMS.RFC1766	英語
DC.type' scheme='DCTERMS.DCMIType	text
DCTERMS.issued' scheme='DCTERMS.W3CDTF	2009-09
DC.subject	Hybrid Structure
	Magnetically Levitated Vehicle
	Non-magnetic Steel
	Dissimilar Steel
	Young’s modulus
DCTERMS.abstract	The strength of a hybrid girder with a high manganese non-magnetic (Hi-Mn) steel / carbon (SM490; SM) steel (Hybrid girder) was investigated based on the results of the elastic-plastic large deformation analysis. The yield stress and Young’s modulus of Hi-Mn steel were 16% larger and 20% smaller compared with those of SM steel. When the upper half was assembled with Hi-Mn steel and the lower half of the cross section of the Hybrid girder was assembled with SM steel, the yielding moment was 2% and 18% larger than those of the girder with only Hi-Mn steel and the girder with only SM steel. The bending stiffness was 8% larger and 11% smaller than those of Hi-Mn and SM girders. The out-of-plane deformation of the web was larger than those of Hi-Mn and SM girders. By moving the position of the horizontal stiffener of the Hybrid girder 10% lower, the out-of-plane deformation of the web was controlled to smaller than those of Hi-Mn and SM girders.
DC.identifier	10.18910/7881
DC.format	7881
citation_title	Strength of High Manganese Non-magnetic Steel/Carbon Steel Hybrid Girder : Investigation for Applying Dissimilar Materials to Steel Structures (Report IV)
citation_author	Hirohata, Mikihito
citation_author	Kim, You-Chul
citation_publisher	大阪大学接合科学研究所
citation_language	英語
citation_date	2009-09
citation_journal_title	Transactions of JWRI
citation_volume	38
citation_issue	1
citation_firstpage	69
citation_lastpage	74
citation_public_url	https://hdl.handle.net/11094/7881
citation_doi_detail	10.18910/7881
citation_doi	https://doi.org/10.18910/7881

Strength of High Manganese Non-magnetic Steel/Carbon Steel Hybrid Girder : Investigation for Applying Dissimilar Materials to Steel Structures (Report IV)

閲覧可能ファイル

論文情報

論文詳細を表示