学術雑誌論文

学術雑誌論文

text

日本機械学会論文集 A編. 2006, 72(724), p. 1941-1948

日本機械学会

日本語

text

2006-12-25

https://doi.org/10.1299/kikaia.72.1941

Pipe inspection with guided waves is highly expected as an efficient screening technique that enables us to inspect a few dozen meters of a pipe. Although inspection equipments widely introduced in a practical inspection site adopt easy-to-use axisymmetric modes, authors have developed defect imaging technique using non-axisymmetric modes as well. In our previous paper, defect images were shown in short range of only 1.2 meters away from transducers. In this study, therefore, effects of long propagation to defect images are discussed. Long range imaging was experimentally done using source signals and their multiple reflections between both edges of a 4meter-long pipe, instead of reflected waves from defects. In the experimental investigation, large degradation of images was shown in far field. A computer simulation of guided wave propagation reveals that a major reason of the degradation is the difference between dispersion curves for an actual pipe and theoretical ones. To reduce the degradation, images were obtained by neglecting higher modes with larger differences in phase velocity. As a result, images were obtained in correct location up to about 20 meters.

84557

長距離伝播するガイド波による損傷画像化

日本機械学会

日本語

2006-12-25

日本機械学会論文集 A編

72

724

1941

1948

https://doi.org/10.1299/kikaia.72.1941

https://hdl.handle.net/11094/84557