Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application

Ueki, Kosuke; Yanagihara, Soh; Ueda, Kyosuke; Nakai, Masaaki; Nakano, Takayoshi; Narushima, Takayuki

doi:https://doi.org/10.1016/j.msea.2019.138400

Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application

Ueki, Kosuke; Yanagihara, Soh; Ueda, Kyosuke et al.

Materials Science and Engineering A, 2019, 766, 138400

アクセス数:112件（2025-03-14 17:52 集計）

固定URL: https://hdl.handle.net/11094/89814

閲覧可能ファイル

ファイル	フォーマット	利用条件	サイズ	閲覧回数	利用開始日	説明	information
MaterSciEngA_766	pdf	なし	17.2 MB	81	2022.12.26

Creative Commons : 表示

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

タイトル	Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application
著者	NRID 1000010845928 1000010845928 著者名 Ueki, Kosuke
	著者名 Yanagihara, Soh
	NRID 1000040507901 1000040507901 著者名 Ueda, Kyosuke
	NRID 1000020431603 1000020431603 著者名 Nakai, Masaaki
	NRID 1000030243182 1000030243182 ORCID 0000-0001-8052-1698 0000-0001-8052-1698 researchmap permalink read0013987 read0013987 Scopus Author ID 7403896013 7403896013 著者名 Nakano, Takayoshi
	NRID 1000020198394 1000020198394 著者名 Narushima, Takayuki
キーワード等	Co-Cr-W-Ni alloy
	Mechanical properties
	Plastic deformation
	Static recrystallization
内容	Ueki K., Yanagihara S., Ueda K., et al. Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application. Materials Science and Engineering A, 766, 138400. https://doi.org/10.1016/j.msea.2019.138400.
抄録	A process combining swaging, static recrystallization, and heat treatment at 873 K (low-temperature heat-treatment, LTHT) was developed for achieving both high ultimate strength and high ductility in Co-20Cr-15W-10Ni (mass%, CCWN) alloy for stent application. The alloys swaged to a sectional area reduction rate of 58.3% were annealed at 1373–1473 K for 30–300 s. Under annealing at 1373 K for 300 s, a fine grain structure with an average grain size of ~6 μm formed, while under annealing at 1473 K, a structure with an average grain size of 12 μm formed after 120 s. In the alloys annealed at 1373–1448 K, the formation of η-phase precipitates (M6X-M12X type, M: metallic elements, X: C and/or N) was observed, while no precipitates were observed in the alloys annealed at 1473 K. The improvement in ultimate strength by grain refinement was confirmed. Alloys annealed at 1473 K showed higher ductility compared to those annealed at 1373–1448 K even if the grain size was similar. It is considered that the η-phase precipitates deteriorated the ductility of the annealed alloys. LTHT suppressed the strain-induced martensitic γ-to-ε transformation to improve the ductility of the fine-grained as well as coarse-grained alloys. Thus, regardless of the grain size, it is newly evidenced that LTHT effectively improves ductility in CCWN alloy. By combining high-temperature short-time annealing and LTHT, both the ultimate strength and ductility of Co-20Cr-15W-10Ni (mass%) alloy improved, and it was possible to provide properties suitable for next-generation balloon-expandable stents with Co-20Cr-15W-10Ni (mass%) alloy.
出版者	Elsevier
収録物名	Materials Science and Engineering A
巻(号)	766
ページ	138400
刊行年月	2019-10-24
言語	英語
ハンドルURL	https://hdl.handle.net/11094/89814
PISSN	09215093
NCID	AA10720420
関連情報 (isIdenticalTo)	DOI (出版社版) https://doi.org/10.1016/j.msea.2019.138400
アクセス権	open access
権利情報	This article is licensed under a Creative Commons Attribution 4.0 International License.
出版タイプ	Version of Record
カテゴリ	学術雑誌論文 Journal Article

資源タイプ	学術雑誌論文
ローカル資源タイプ	学術雑誌論文
DCMI資源タイプ	text
DCTERMS.bibliographicCitation	Materials Science and Engineering A. 2019, 766, p. 138400
DC.title	Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application
DC.creator	Ueki, Kosuke
	Yanagihara, Soh
	Ueda, Kyosuke
	Nakai, Masaaki
	Nakano, Takayoshi
	Narushima, Takayuki
DC.publisher	Elsevier
DC.language' scheme='DCTERMS.RFC1766	英語
DC.type' scheme='DCTERMS.DCMIType	text
DCTERMS.issued' scheme='DCTERMS.W3CDTF	2019-10-24
DC.identifier	https://doi.org/10.1016/j.msea.2019.138400
DC.subject	Co-Cr-W-Ni alloy
	Mechanical properties
	Plastic deformation
	Static recrystallization
DC.description	Ueki K., Yanagihara S., Ueda K., et al. Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application. Materials Science and Engineering A, 766, 138400. https://doi.org/10.1016/j.msea.2019.138400.
DCTERMS.abstract	A process combining swaging, static recrystallization, and heat treatment at 873 K (low-temperature heat-treatment, LTHT) was developed for achieving both high ultimate strength and high ductility in Co-20Cr-15W-10Ni (mass%, CCWN) alloy for stent application. The alloys swaged to a sectional area reduction rate of 58.3% were annealed at 1373–1473 K for 30–300 s. Under annealing at 1373 K for 300 s, a fine grain structure with an average grain size of ~6 μm formed, while under annealing at 1473 K, a structure with an average grain size of 12 μm formed after 120 s. In the alloys annealed at 1373–1448 K, the formation of η-phase precipitates (M6X-M12X type, M: metallic elements, X: C and/or N) was observed, while no precipitates were observed in the alloys annealed at 1473 K. The improvement in ultimate strength by grain refinement was confirmed. Alloys annealed at 1473 K showed higher ductility compared to those annealed at 1373–1448 K even if the grain size was similar. It is considered that the η-phase precipitates deteriorated the ductility of the annealed alloys. LTHT suppressed the strain-induced martensitic γ-to-ε transformation to improve the ductility of the fine-grained as well as coarse-grained alloys. Thus, regardless of the grain size, it is newly evidenced that LTHT effectively improves ductility in CCWN alloy. By combining high-temperature short-time annealing and LTHT, both the ultimate strength and ductility of Co-20Cr-15W-10Ni (mass%) alloy improved, and it was possible to provide properties suitable for next-generation balloon-expandable stents with Co-20Cr-15W-10Ni (mass%) alloy.
DC.rights	This article is licensed under a Creative Commons Attribution 4.0 International License.
DC.format	89814
citation_title	Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application
citation_author	Ueki, Kosuke
	Yanagihara, Soh
	Ueda, Kyosuke
	Nakai, Masaaki
	Nakano, Takayoshi
	Narushima, Takayuki
citation_publisher	Elsevier
citation_language	英語
citation_date	2019-10-24
citation_journal_title	Materials Science and Engineering A
citation_volume	766
citation_firstpage	138400
citation_doi	https://doi.org/10.1016/j.msea.2019.138400
citation_public_url	https://hdl.handle.net/11094/89814

Overcoming the strength-ductility trade-off by the combination of static recrystallization and low-temperature heat-treatment in Co-Cr-W-Ni alloy for stent application

閲覧可能ファイル

論文情報

論文詳細を表示