Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation

Liu, Yang; Chen, Chuantong; Wang, Ye; Zhang, Zheng; Liu, Ran; Ueshima, Minoru; Ota, Ichiro; Nishikawa, Hiroshi; Nishijima, Masahiko; Nakayama, Koji S.; Suganuma, Katsuaki

doi:https://doi.org/10.1016/j.compositesb.2024.111519

Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation

Liu, Yang; Chen, Chuantong; Wang, Ye et al.

Composites Part B: Engineering, 2024, 281, 111519

アクセス数:1,154件（2025-07-11 13:03 集計）

固定URL: https://hdl.handle.net/11094/97169

閲覧可能ファイル

ファイル	フォーマット	利用条件	サイズ	閲覧回数	利用開始日	説明	information
ComposPartB_Eng_281_111519	pdf	なし	21.0 MB	127	2024.07.16

Creative Commons : 表示 - 非営利 - 改変禁止

論文情報

ファイル出力 EndNote Basic出力 Mendeley出力

タイトル	Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation
著者	NRID 1000080922088 1000080922088 researchmap permalink lyy lyy 著者名 Liu, Yang
	NRID 1000050791703 1000050791703 ORCID 0000-0002-2365-4387 0000-0002-2365-4387 researchmap permalink chenchuantong chenchuantong Scopus Author ID 57189686286 57189686286 著者名 Chen, Chuantong
	著者名 Wang, Ye
	著者名 Zhang, Zheng
	著者名 Liu, Ran
	著者名 Ueshima, Minoru
	著者名 Ota, Ichiro
	NRID 1000090346180 1000090346180 ORCID 0000-0002-4363-9520 0000-0002-4363-9520 researchmap permalink read0191232 read0191232 Scopus Author ID 57219209494 57219209494 著者名 Nishikawa, Hiroshi
	ORCID 0000-0002-5143-7558 0000-0002-5143-7558 researchmap permalink 7000005445 7000005445 Scopus Author ID 13608349900 13608349900 著者名 Nishijima, Masahiko
	NRID 1000050312640 1000050312640 ORCID 0000-0002-9165-3810 0000-0002-9165-3810 researchmap permalink kojisnakayama kojisnakayama 著者名 Nakayama, Koji S.
	NRID 1000010154444 1000010154444 researchmap permalink ksuganuma ksuganuma 著者名 Suganuma, Katsuaki
キーワード等	Ag@Si composite sintering
	Buildup stress mitigation
	Closer matched CTE
	Enhanced reliability
	Inhibited degradation
内容	Liu Y., Chen C., Wang Y., et al. Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation. Composites Part B: Engineering 281, 111519 (2024); https://doi.org/10.1016/j.compositesb.2024.111519.
抄録	Owing to its cost-effectiveness and low coefficient of thermal expansion (CTE), micron Si is incorporated into sintered Ag matrix to develop an Ag@Si composite sintering strategy. The Si integration helps reduce cost and alleviate CTE-mismatch of Ag-sintered die attachments. An innovative Ag@Si composite sintering structure is achieved by low-temperature and pressure-less sintering process, where a possibly slight diffusion of native SiO2 on the Si surface toward Ag is indicated by TEM observation, enabling the integration of Ag and Si into one continuous network. Owing to the robust well-bonded composite sintering, the Ag@Si joining strategy provides mechanical/microstructural reliability far beyond the pure Ag sinter joining, demonstrating significant prospects in high-temperature interconnection applications. During the harsh thermal cycling (−50–250 °C), the mitigating effect of the Si addition on CTE mismatch is manifested through the substantial suppression of microstructure deterioration in Ag@Si joint that occurs in pure-Ag-sintered joint, while the shear strength retention rate is doubled. Detailed investigation into the mechanism for elevated performance was conducted by material property and Missies stress analysis. The incorporation of Si helps modify the CTE, elastic properties, and stress distribution of Ag@Si-sintered material, synergistically contributing to the satisfactory joining reliability.
出版者	Elsevier Ltd
収録物名	Composites Part B: Engineering
巻(号)	281
ページ	111519
刊行年月	2024-07-15
言語	英語
ハンドルURL	https://hdl.handle.net/11094/97169
PISSN	13598368
関連情報 (isIdenticalTo)	DOI (出版社版) https://doi.org/10.1016/j.compositesb.2024.111519
アクセス権	open access
権利情報	This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
出版タイプ	Version of Record
カテゴリ	学術雑誌論文 Journal Article

資源タイプ	学術雑誌論文
ローカル資源タイプ	学術雑誌論文
DCTERMS.bibliographicCitation	Composites Part B: Engineering. 2024, 281, p. 111519
DC.title	Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation
DC.creator	Liu, Yang
	Chen, Chuantong
	Wang, Ye
	Zhang, Zheng
	Liu, Ran
	Ueshima, Minoru
	Ota, Ichiro
	Nishikawa, Hiroshi
	Nishijima, Masahiko
	Nakayama, Koji S.
	Suganuma, Katsuaki
DC.publisher	Elsevier Ltd
DC.language' scheme='DCTERMS.RFC1766	英語
DCTERMS.issued' scheme='DCTERMS.W3CDTF	2024-07-15
DC.identifier	https://doi.org/10.1016/j.compositesb.2024.111519
DC.subject	Ag@Si composite sintering
	Buildup stress mitigation
	Closer matched CTE
	Enhanced reliability
	Inhibited degradation
DC.description	Liu Y., Chen C., Wang Y., et al. Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation. Composites Part B: Engineering 281, 111519 (2024); https://doi.org/10.1016/j.compositesb.2024.111519.
DCTERMS.abstract	Owing to its cost-effectiveness and low coefficient of thermal expansion (CTE), micron Si is incorporated into sintered Ag matrix to develop an Ag@Si composite sintering strategy. The Si integration helps reduce cost and alleviate CTE-mismatch of Ag-sintered die attachments. An innovative Ag@Si composite sintering structure is achieved by low-temperature and pressure-less sintering process, where a possibly slight diffusion of native SiO2 on the Si surface toward Ag is indicated by TEM observation, enabling the integration of Ag and Si into one continuous network. Owing to the robust well-bonded composite sintering, the Ag@Si joining strategy provides mechanical/microstructural reliability far beyond the pure Ag sinter joining, demonstrating significant prospects in high-temperature interconnection applications. During the harsh thermal cycling (−50–250 °C), the mitigating effect of the Si addition on CTE mismatch is manifested through the substantial suppression of microstructure deterioration in Ag@Si joint that occurs in pure-Ag-sintered joint, while the shear strength retention rate is doubled. Detailed investigation into the mechanism for elevated performance was conducted by material property and Missies stress analysis. The incorporation of Si helps modify the CTE, elastic properties, and stress distribution of Ag@Si-sintered material, synergistically contributing to the satisfactory joining reliability.
DC.rights	This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
DC.format	97169
citation_title	Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation
citation_author	Liu, Yang
	Chen, Chuantong
	Wang, Ye
	Zhang, Zheng
	Liu, Ran
	Ueshima, Minoru
	Ota, Ichiro
	Nishikawa, Hiroshi
	Nishijima, Masahiko
	Nakayama, Koji S.
	Suganuma, Katsuaki
citation_publisher	Elsevier Ltd
citation_language	英語
citation_date	2024-07-15
citation_journal_title	Composites Part B: Engineering
citation_volume	281
citation_firstpage	111519
citation_doi	https://doi.org/10.1016/j.compositesb.2024.111519
citation_public_url	https://hdl.handle.net/11094/97169

Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation

閲覧可能ファイル

論文情報

論文詳細を表示