Fundamental Study of Direct Joining between Ceramic and Engineering Plastic Using Lasers

Kawahito, Yousuke; Niwa, Yusuke; Katayama, Seiji

doi:https://doi.org/10.18910/50967

Fundamental Study of Direct Joining between Ceramic and Engineering Plastic Using Lasers

Kawahito, Yousuke; Niwa, Yusuke; Katayama, Seiji

Transactions of JWRI, 2014, 43(1), 11-14

Number of Access:288（2025-08-27 04:42 Counts）

Identifier to cite or link to this item: https://doi.org/10.18910/50967

Link to primary information

File	Format	Terms of use	Size	Views	Date.Available	Description	information
jwri43_1-011	pdf	None	1.08 MB	106	2014.11.17

Item Information

Output File Export EndNote Basic Export Mendeley

Title	Fundamental Study of Direct Joining between Ceramic and Engineering Plastic Using Lasers
Creator	NRID 1000070379105 1000070379105 CreatorName Kawahito, Yousuke
	CreatorName Niwa, Yusuke
	NRID 1000010144528 1000010144528 CreatorName Katayama, Seiji
Subject	Dissimilar-Material Welding
	Direct Joining
	Ceramic
	Engineering Plastic
	Lasers
Abstract	Dissimilar-material welding or joining are necessary and important from a manufacturing viewpoint. Therefore, the authors have developed a laser direct joining method between metals and plastics with using a metal oxide film. In this study, the laser direct joining was applied to join ceramic of Si_<3>N_<4> to engineering plastic of polyethylene terephthalate (PET), although the metal was replaced by the ceramic. Since, the ceramic is similar to metal oxide or nitride in elemental composition. The shear strength of the joints of 30 mm in width was over 3000 N, which was strong enough to elongate the base plates of 2 mm in thickness. It was confirmed that the laser direct joining process has the potential to directly produce a strong dissimilar material in a joint of a ceramic and an engineering plastic.
Publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
Source Title	Transactions of JWRI
Volume (Issue)	43(1)
Page	11-14
Date of Issued	2014-06
Language	English
Handle URL	https://hdl.handle.net/11094/50967
DOI	https://doi.org/10.18910/50967
PISSN	03874508
NCID	AA00867058
Access Rights	open access
oaire:version	Version of Record
Category	紀要論文 Departmental Bulletin Paper
Category	Transactions of JWRI / Vol.43 No.1 (2014-06)

Resource Type	departmental bulletin paper
Local Type	Departmental Bulletin Paper
DCMI Type	Text
DCTERMS.bibliographicCitation	Transactions of JWRI. 2014, 43(1), p. 11-14
DC.title	Fundamental Study of Direct Joining between Ceramic and Engineering Plastic Using Lasers
DC.creator	Kawahito, Yousuke
	Niwa, Yusuke
	Katayama, Seiji
DC.publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
DC.language' scheme='DCTERMS.RFC1766	English
DC.type' scheme='DCTERMS.DCMIType	Text
DCTERMS.issued' scheme='DCTERMS.W3CDTF	2014-06
DC.subject	Dissimilar-Material Welding
	Direct Joining
	Ceramic
	Engineering Plastic
	Lasers
DCTERMS.abstract	Dissimilar-material welding or joining are necessary and important from a manufacturing viewpoint. Therefore, the authors have developed a laser direct joining method between metals and plastics with using a metal oxide film. In this study, the laser direct joining was applied to join ceramic of Si_<3>N_<4> to engineering plastic of polyethylene terephthalate (PET), although the metal was replaced by the ceramic. Since, the ceramic is similar to metal oxide or nitride in elemental composition. The shear strength of the joints of 30 mm in width was over 3000 N, which was strong enough to elongate the base plates of 2 mm in thickness. It was confirmed that the laser direct joining process has the potential to directly produce a strong dissimilar material in a joint of a ceramic and an engineering plastic.
DC.identifier	10.18910/50967
DC.format	50967
citation_title	Fundamental Study of Direct Joining between Ceramic and Engineering Plastic Using Lasers
citation_author	Kawahito, Yousuke
	Niwa, Yusuke
	Katayama, Seiji
citation_publisher	大阪大学接合科学研究所
citation_language	English
citation_date	2014-06
citation_journal_title	Transactions of JWRI
citation_volume	43
citation_issue	1
citation_firstpage	11
citation_lastpage	14
citation_public_url	https://hdl.handle.net/11094/50967
citation_doi_detail	10.18910/50967
citation_doi	https://doi.org/10.18910/50967

Fundamental Study of Direct Joining between Ceramic and Engineering Plastic Using Lasers

Link to primary information

Item Information

Show details