Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining

Nagatsuka, Kimiaki; Bolyu, Xiao; Tsuchiya, Atsuki; Tsukamoto, Masahiro; Nakata, Kazuhiro

doi:https://doi.org/10.18910/57264

Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining

Nagatsuka, Kimiaki; Bolyu, Xiao; Tsuchiya, Atsuki et al.

Transactions of JWRI, 2015, 44(1), 9-14

Number of Access:688（2025-11-20 04:45 Counts）

Identifier to cite or link to this item: https://doi.org/10.18910/57264

Link to primary information

File	Format	Terms of use	Size	Views	Date.Available	Description	information
jwri44_1-009	pdf	None	1.89 MB	319	2016.07.25

Item Information

Output File Export EndNote Basic Export Mendeley

Title	Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining
Creator	CreatorName Nagatsuka, Kimiaki
	CreatorName Bolyu, Xiao
	CreatorName Tsuchiya, Atsuki
	NRID 1000090273713 1000090273713 researchmap permalink mtsukamoto mtsukamoto Scopus Author ID 35370999700 35370999700 CreatorName Tsukamoto, Masahiro
	NRID 1000080112069 1000080112069 CreatorName Nakata, Kazuhiro
Subject	Friction lap joining
	CFRTP
	AL alloy
	Dissimilar materials joining
Abstract	Carbon fiber reinforced thermoplastics,which consisted of the polyamide 6 as the matrix and 20wt%carbon fiber,and A5052 plates were directly joined by the friction lap joining method.A continuous joined interface of A5052/CFRTP joint was obtained at various tool rotation speeds ranging from 1000 to 2500rmp.These materials were joined by bonding of MgO oxide layer of A5052 and PA6 as the matrix of the CFRTP.Voids were observed in the CFRTP at the interface of the joint,and its quantity increased with increasing tool rotation speed.The tensile shear fracture load of the FLJ joint increased with increasing the tool rotation speed from 1000 to 2000 rpm,and then it decreased.The fracture mainly occurred at the joint interface,however,some joints joined at the tool rotation speed of 2000 and 2500 rpm showed the CFRTP base plate fracture.
Publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
Source Title	Transactions of JWRI
Volume (Issue)	44(1)
Page	9-14
Date of Issued	2015-06
Language	English
Handle URL	https://hdl.handle.net/11094/57264
DOI	https://doi.org/10.18910/57264
PISSN	03874508
NCID	AA00867058
Access Rights	open access
oaire:version	Version of Record
Category	紀要論文 Departmental Bulletin Paper
Category	Transactions of JWRI / Vol.44 No.1 (2015-06)

Resource Type	departmental bulletin paper
Local Type	Departmental Bulletin Paper
DCMI Type	Text
DCTERMS.bibliographicCitation	Transactions of JWRI. 2015, 44(1), p. 9-14
DC.title	Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining
DC.creator	Nagatsuka, Kimiaki
	Bolyu, Xiao
	Tsuchiya, Atsuki
	Tsukamoto, Masahiro
	Nakata, Kazuhiro
DC.publisher	大阪大学接合科学研究所
	オオサカダイガクセツゴウカガクケンキュウジョ
	Joining and Welding Research Institute, Osaka University
DC.language' scheme='DCTERMS.RFC1766	English
DC.type' scheme='DCTERMS.DCMIType	Text
DCTERMS.issued' scheme='DCTERMS.W3CDTF	2015-06
DC.subject	Friction lap joining
	CFRTP
	AL alloy
	Dissimilar materials joining
DCTERMS.abstract	Carbon fiber reinforced thermoplastics,which consisted of the polyamide 6 as the matrix and 20wt%carbon fiber,and A5052 plates were directly joined by the friction lap joining method.A continuous joined interface of A5052/CFRTP joint was obtained at various tool rotation speeds ranging from 1000 to 2500rmp.These materials were joined by bonding of MgO oxide layer of A5052 and PA6 as the matrix of the CFRTP.Voids were observed in the CFRTP at the interface of the joint,and its quantity increased with increasing tool rotation speed.The tensile shear fracture load of the FLJ joint increased with increasing the tool rotation speed from 1000 to 2000 rpm,and then it decreased.The fracture mainly occurred at the joint interface,however,some joints joined at the tool rotation speed of 2000 and 2500 rpm showed the CFRTP base plate fracture.
DC.identifier	10.18910/57264
DC.format	57264
citation_title	Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining
citation_author	Nagatsuka, Kimiaki
	Bolyu, Xiao
	Tsuchiya, Atsuki
	Tsukamoto, Masahiro
	Nakata, Kazuhiro
citation_publisher	大阪大学接合科学研究所
citation_language	English
citation_date	2015-06
citation_journal_title	Transactions of JWRI
citation_volume	44
citation_issue	1
citation_firstpage	9
citation_lastpage	14
citation_public_url	https://hdl.handle.net/11094/57264
citation_doi_detail	10.18910/57264
citation_doi	https://doi.org/10.18910/57264

Dissimilar Materials Joining of AL Alloy/CFRTP by Friction Lap Joining

Link to primary information

Item Information

Show details